Pipe Fitting Manufacturer,Pipe Fitting Factory

Cross-Type Tube Fitting with Dual Ferrules
Cross-Type Tube Fitting with Dual Ferrules is a precision stainless steel tube fitting designed to connect four tubes of the same outer diameter in a cross or “+” configuration. Each connection point uses a dual ferrule compression sealing system providing a leak-tight and vibration-resistant joint. Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Hot Tags : Connector Fittings hydraulic fittings Pipe Fitting quick couplings tube fittings
Read More
3/8″ High Pressure Tube Fitting | 20000 psi
Ultra-high pressure tube fittings designed to connect tubing in extreme pressure environments—up to 20,000 psi (≈1378 bar). They are commonly used in hydraulic control systems, pressure testing equipment, and instrumentation where standard compression fittings cannot handle the pressure. Common Types : a. Straight Tube Connector: Connects two tubes in a straight line b. Union Elbow (90°): Tube connection at right angle c. Tee Connector: Connects three tube runs (T-shape) d. Bulkhead Connector: Passes tubing through a panel or enclosure e. Male / Female Adapters: Connect tubing to threaded components f. Caps & Plugs: Close off ports or tubing for pressure test sealing

Hot Tags : compression Pipe Fittings female Npt Fitting
Read More
Female Connectors
Female Connectors are stainless steel tube fittings designed to connect a tube end to a female-threaded port or component. One end connects to the tube using a dual ferrule compression system while the other end has an internal (female) thread, allowing secure connection with a male-threaded component, valve, manifold, or instrumentation port. Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Hot Tags : Connector Fittings Hydraulic Adapter Hydraulic Fitting Pipe Fitting stainless steel fittings
Read More
Female Branch Tees
Female Branch Tees (Stainless Steel Female Branch Tee Tube Fittings) are three-way tube fittings that connect two tubes in a straight run and provide a female-threaded outlet branch at a 90° angle. The straight run uses a dual-ferrule compression connection to grip the tubing, while the branch side has an internal thread (female thread), allowing connection with a male-threaded fitting or instrument. Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Hot Tags : Connector Fittings forging pipe fitting Hydraulic Adapter pipe coupling tube fittings
Read More
Bulkhead Female Connectors
Bulkhead Female Connectors are stainless steel tube fittings designed to connect a tube to a male-threaded port through a panel, enclosure, or bulkhead wall. The connector has a female threaded end and a compression tube end. It includes a bulkhead locknut to secure the fitting onto a fixed surface. Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Hot Tags : Combination-Joint-Fittings Fitting Connector hose adapter Hydraulic Adapter Pipe Fitting
Read More