Tube Ftting & Tube

Cross-Type Tube Fitting with Dual Ferrules is a precision stainless steel tube fitting designed to connect four tubes of the same outer diameter in a cross or “+” configuration. Each connection point uses a dual ferrule compression sealing system providing a leak-tight and vibration-resistant joint.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Stainless Steel Male Connectors Tube Fittings are precision-engineered fittings used to connect a tube end to a female threaded port in instrumentation, hydraulic, and pneumatic systems. One end of the fitting connects to straight tubing using a dual ferrule compression seal, and the other end connects to equipment, valve, manifold, or another component using a male thread.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Union Tee Connector Fitting is a stainless steel tube fitting designed to connect three tubes of the same outer diameter in a T-shaped (90°) configuration. It allows the process flow to branch into two directions or combine two flow paths into one.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Stainless Steel Instrumentation Tubing is a precision-engineered, seamless (or welded) tube used to transport gases or liquids in instrumentation and control systems. It is commonly used together with instrument valves, fittings, and manifolds to create leak-tight and corrosion-resistant piping connections.   Available Sizes: Metric (mm): 6, 8, 10, 12, 14, 16, 20 mm Imperial (inch): 1/4", 3/8", 1/2", 3/4", 1"   Key Features: Material: Typically 316 / 316L stainless steel Manufacturing: Seamless or welded, precision-drawn Connection: Used with compression tube fittings (e.g., double ferrule fittings) Pressure / Temperature: Suitable for high pressure and high temperature environments Corrosion resistance: Excellent performance in offshore, chemical, power plants, and general industrial environments

  Weld Connectors (Stainless Steel Weld Connectors) are tube or pipe fittings designed to be permanently welded to tubing or piping systems, providing a strong, leak-proof, and vibration-resistant connection. Unlike compression or threaded fittings, weld connectors are fused directly to the tube or pipe surface, making them ideal for high pressure, high temperature, or critical sealing applications.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Union Elbow (Stainless Steel Union Elbow) is a tube fitting designed to connect two tubes at a 90-degree angle while allowing easy disassembly. Unlike a regular elbow, a union elbow has a union nut and ferrules, so the connection can be taken apart without rotating the tubing—ideal for maintenance and tight spaces.     Key Features: a. Material SS316 / SS316L: Excellent corrosion resistance, suitable for instrumentation. b. Union design: Enables easy disconnection and reconnection to modify or service the system. c. Ferrule system: Dual ferrules create leak-tight sealing. d. Tubing size options: Common sizes: 1/8", 1/4", 3/8", 1/2" (or metric). e. Pressure rating: High-pressure capability depending on tube size and standard.

Union Connectors are stainless steel fittings that connect two tubes of the same outer diameter using a removable union design. The union design allows the fitting to be assembled or disassembled without cutting the tubing, providing a secure, leak-tight, and vibration-resistant connection.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Union Ball Joints (Stainless Steel Union Ball Joints) are mechanical tube or pipe connectors that use a ball-and-socket structure to allow flexible angular movement between connecting lines. This design enables the connection to absorb misalignment, vibration, and thermal expansion without creating leaks.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Tube Fitting Caps (Stainless Steel Tube Fitting Caps) are protective end caps used to seal off the end of a tube or tube fitting in instrumentation and fluid system applications. They are part of the dual ferrule tube fitting system , designed to provide a reliable, leak-tight closure for unused ports, tube ends, or temporarily disconnected lines. These caps are installed over the male tube fitting and tightened with a nut to form a secure, metal-to-metal seal using ferrules.   Common Sizes: a. 1/4”, 3/8”, 1/2”, 3/4”, 1” (inch) 6. 6mm, 8mm, 10mm, 12mm, 16mm (metric)

Tee-Type Male Tube Fitting with Dual Ferrules is a precision-engineered stainless steel connector designed for high-integrity tube-to-thread transitions in instrumentation and fluid control systems. Featuring a male threaded end and two tube ends, it allows a leak-tight and secure connection at a 90° tee junction. Manufactured from high-grade 316 / 316L stainless steel, the fitting offers superior corrosion resistance and reliable performance under high pressure and vibration environments.   Key Features: a. Dual ferrule design ensures a strong mechanical grip and leak-proof metal-to-metal seal b.  T-shaped configuration allows branching of process lines without welding c. Compatible with double ferrule compression systems  d. Precision threads comply with NPT, BSPT, BSPP, or Metric thread standards e. Suitable for gas, liquid, and hydraulic systems    

Reducing Unions are stainless steel fittings used to connect two tubes or pipes of different diameters while maintaining a secure, leak-tight union connection. The union design allows the fitting to be assembled and disassembled without cutting the tubing, making it ideal for maintenance or system modifications.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Reducer Elbows are stainless steel tube or pipe fittings that combine flow direction change with size reduction in one fitting. They are designed to connect a larger tube or pipe to a smaller one while redirecting flow at a specified angle, typically 45° or 90°.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal