Fittings

Cross-Type Tube Fitting with Dual Ferrules is a precision stainless steel tube fitting designed to connect four tubes of the same outer diameter in a cross or “+” configuration. Each connection point uses a dual ferrule compression sealing system providing a leak-tight and vibration-resistant joint.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Stainless Steel Male Connectors Tube Fittings are precision-engineered fittings used to connect a tube end to a female threaded port in instrumentation, hydraulic, and pneumatic systems. One end of the fitting connects to straight tubing using a dual ferrule compression seal, and the other end connects to equipment, valve, manifold, or another component using a male thread.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Union Tee Connector Fitting is a stainless steel tube fitting designed to connect three tubes of the same outer diameter in a T-shaped (90°) configuration. It allows the process flow to branch into two directions or combine two flow paths into one.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

The Male Threaded 3/8″ Compression Fitting is engineered for ultra-high pressure applications requiring a reliable transition between cone-and-thread tubing and a female-threaded port. Designed for operating pressures up to 20,000 psi , this fitting ensures a leak-tight seal even under extreme pressure, vibration, and temperature conditions.   Common Types : a. Straight Tube Connector: Connects two tubes in a straight line b. Union Elbow (90°): Tube connection at right angle c. Tee Connector: Connects three tube runs (T-shape) d. Bulkhead Connector: Passes tubing through a panel or enclosure e. Male / Female Adapters: Connect tubing to threaded components f. Caps & Plugs: Close off ports or tubing for pressure test sealing

The Autoclave High-Voltage Tube Adapter is engineered to connect cone-and-thread ultra-high-pressure tubing to threaded components in systems rated up to 20,000 psi (1379 bar). Designed for Autoclave Engineers-style high-pressure connection standards, this adapter ensures a reliable, leak-tight transition between tubing and instrument ports without compromising safety or pressure performance.     Common Typical : Autoclave Engineers style cone & thread connection Rated for 20,000 psi (1379 bar) ultra-high pressure applications Designed to adapt tube connection to threaded ports (male or female) Material options: SS316 / SS316L / 17-4PH Precision machined for vibration-resistant, leak-proof sealing Compatible with high-pressure valves, manifolds, tees, and fittings

Ultra-high pressure tube fittings designed to connect tubing in extreme pressure environments—up to 20,000 psi (≈1378 bar). They are commonly used in hydraulic control systems, pressure testing equipment, and instrumentation where standard compression fittings cannot handle the pressure.   Common Types : a. Straight Tube Connector: Connects two tubes in a straight line b. Union Elbow (90°): Tube connection at right angle c. Tee Connector: Connects three tube runs (T-shape) d. Bulkhead Connector: Passes tubing through a panel or enclosure e. Male / Female Adapters: Connect tubing to threaded components f. Caps & Plugs: Close off ports or tubing for pressure test sealing

Reducing Unions are stainless steel fittings used to connect two tubes or pipes of different diameters while maintaining a secure, leak-tight union connection. The union design allows the fitting to be assembled and disassembled without cutting the tubing, making it ideal for maintenance or system modifications.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Female Connectors are stainless steel tube fittings designed to connect a tube end to a female-threaded port or component. One end connects to the tube using a dual ferrule compression system while the other end has an internal (female) thread, allowing secure connection with a male-threaded component, valve, manifold, or instrumentation port.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Female Branch Tees (Stainless Steel Female Branch Tee Tube Fittings) are three-way tube fittings that connect two tubes in a straight run and provide a female-threaded outlet branch at a 90° angle. The straight run uses a dual-ferrule compression connection to grip the tubing, while the branch side has an internal thread (female thread), allowing connection with a male-threaded fitting or instrument.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Female Adapters (Stainless Steel Female Adapters) are a type of tube or pipe fitting used to connect tubing to a threaded component. The key characteristic is that one end has a female thread (internal thread) that allows a male-threaded part to be screwed into it, and the other end may connect to tubing using compression ferrules or can be welded, depending on the model.   Common Types: a. Female NPT Adapter(Tube × NPT female): Converts tubing to female NPT threaded port. b. Female BSP Adapter(Tube × BSP female): For British piping standards (Europe/Asia). c. Female UNF Adapter: Used in instrumentation / precise flow systems. d. Female Weld Adapter: Tube end is weldable; female thread on the other end.

Bulkhead Female Connectors are stainless steel tube fittings designed to connect a tube to a male-threaded port through a panel, enclosure, or bulkhead wall. The connector has a female threaded end and a compression tube end. It includes a bulkhead locknut to secure the fitting onto a fixed surface.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

45° Male Elbow Hydraulic Fitting is a stainless steel connector used to change the direction of fluid flow by 45 degrees in hydraulic or instrumentation piping systems. One end features a male thread, and the other end connects to tubing, hose, or another component, allowing for compact routing in tight spaces while maintaining a secure, leak-proof connection.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal