Tube fitting

Cross-Type Tube Fitting with Dual Ferrules is a precision stainless steel tube fitting designed to connect four tubes of the same outer diameter in a cross or “+” configuration. Each connection point uses a dual ferrule compression sealing system providing a leak-tight and vibration-resistant joint.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Stainless Steel Male Connectors Tube Fittings are precision-engineered fittings used to connect a tube end to a female threaded port in instrumentation, hydraulic, and pneumatic systems. One end of the fitting connects to straight tubing using a dual ferrule compression seal, and the other end connects to equipment, valve, manifold, or another component using a male thread.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

Ultra High Pressure Tee Tube Fitting is designed to connect three cone-and-thread tubing lines in high-pressure instrumentation systems. Manufactured from stainless steel (typically 316 or 17-4PH), this tee fitting delivers leak-tight performance in pressures up to 20,000 psi (1379 bar). Ideal for hydraulic control systems, pressure testing equipment, and extreme-pressure fluid handling.   Common Types : a. Straight Tube Connector: Connects two tubes in a straight line b. Union Elbow (90°): Tube connection at right angle c. Tee Connector: Connects three tube runs (T-shape) d. Bulkhead Connector: Passes tubing through a panel or enclosure e. Male / Female Adapters: Connect tubing to threaded components f. Caps & Plugs: Close off ports or tubing for pressure test sealing

The Ultra High Pressure Elbow Tube Fitting is engineered for connecting cone-and-thread tubing at a precise 90-degree angle in extreme pressure applications. Designed from high-strength stainless steel (SS316 or 17-4PH), this elbow fitting delivers reliable, leak-tight performance in systems operating up to 20,000 psi (1379 bar). Ideal for installations where space is limited and flow direction needs to change without compromising pressure or safety.   Common Types : a. Straight Tube Connector: Connects two tubes in a straight line b. Union Elbow (90°): Tube connection at right angle c. Tee Connector: Connects three tube runs (T-shape) d. Bulkhead Connector: Passes tubing through a panel or enclosure e. Male / Female Adapters: Connect tubing to threaded components f. Caps & Plugs: Close off ports or tubing for pressure test sealing

The Ultra High Pressure Cross Tube Fitting is designed for connecting four cone-and-thread tubes in ultra-high pressure hydraulic or instrumentation systems. Each port maintains a secure, leak-tight connection using the cone & thread assembly, ensuring consistent performance at working pressures up to 20,000 psi (1379 bar). Manufactured from high-strength stainless steel (SS316 or 17-4PH), this cross fitting offers excellent corrosion resistance and durability in extreme environments.   Common Types : a. Straight Tube Connector: Connects two tubes in a straight line b. Union Elbow (90°): Tube connection at right angle c. Tee Connector: Connects three tube runs (T-shape) d. Bulkhead Connector: Passes tubing through a panel or enclosure e. Male / Female Adapters: Connect tubing to threaded components f. Caps & Plugs: Close off ports or tubing for pressure test sealing

The Male Threaded 3/8″ Compression Fitting is engineered for ultra-high pressure applications requiring a reliable transition between cone-and-thread tubing and a female-threaded port. Designed for operating pressures up to 20,000 psi , this fitting ensures a leak-tight seal even under extreme pressure, vibration, and temperature conditions.   Common Types : a. Straight Tube Connector: Connects two tubes in a straight line b. Union Elbow (90°): Tube connection at right angle c. Tee Connector: Connects three tube runs (T-shape) d. Bulkhead Connector: Passes tubing through a panel or enclosure e. Male / Female Adapters: Connect tubing to threaded components f. Caps & Plugs: Close off ports or tubing for pressure test sealing

Tee-Type Male Tube Fitting with Dual Ferrules is a precision-engineered stainless steel connector designed for high-integrity tube-to-thread transitions in instrumentation and fluid control systems. Featuring a male threaded end and two tube ends, it allows a leak-tight and secure connection at a 90° tee junction. Manufactured from high-grade 316 / 316L stainless steel, the fitting offers superior corrosion resistance and reliable performance under high pressure and vibration environments.   Key Features: a. Dual ferrule design ensures a strong mechanical grip and leak-proof metal-to-metal seal b.  T-shaped configuration allows branching of process lines without welding c. Compatible with double ferrule compression systems  d. Precision threads comply with NPT, BSPT, BSPP, or Metric thread standards e. Suitable for gas, liquid, and hydraulic systems    

Female Branch Tees (Stainless Steel Female Branch Tee Tube Fittings) are three-way tube fittings that connect two tubes in a straight run and provide a female-threaded outlet branch at a 90° angle. The straight run uses a dual-ferrule compression connection to grip the tubing, while the branch side has an internal thread (female thread), allowing connection with a male-threaded fitting or instrument.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal

45° Male Elbow Hydraulic Fitting is a stainless steel connector used to change the direction of fluid flow by 45 degrees in hydraulic or instrumentation piping systems. One end features a male thread, and the other end connects to tubing, hose, or another component, allowing for compact routing in tight spaces while maintaining a secure, leak-proof connection.   Common Thread Types: a. NPT Thread: Thread interference (uses PTFE sealant/tape) b. BSPP Thread: Uses O-ring or bonded washer c. BSPT Thread: Thread interference (similar to NPT) d. JIC 37° Flare: 37° metal-to-metal flare seal